Volvo PTT Perform Newer Parameter Template Programming Guide

This article show a guide on how to use Volvo PTT perform newer parameter template programming.

 

What You Need?

2024 Volvo  TechTool PTT 2.8.241 APCI 0.7.1.0/2.7.116 All Version Free Download

Volvo Diagnostic Kit (88890300)

Volvo VOCOM 88890300 Diagnostic Kit

 

Precedures:

Run Volvo PTT and login user ID and enter password

After connection,get the screen as below

Enter a work order number or select a recently used work order number in the list

Click “Start Work”

Select “Program”

Preparations:

Reading user information

Reading product information

Checking operation support.This may take several minutes

Operations valid for this product are being selected

Select 1700-22-03-03 Parameter,programming,and check information as below thenSelect “Start” button to continue

Purpose

This operation is used to read and program parameter values

 

Description

If a parameter has a complex structure(more than two values) More>>will be displayed in the Value column.

Incorrectly set parameters could adversely affect the operation of the vehicle or components and could cause personal injury in some cases.Make certain the vehicle is equipped with the appropriate components and features before resetting any parameters

 

The programmer is responsible for ensuring that programming is carried out correctly and that the road speed limit complies with relevant legislation.

Note:Certification from relevant authorities is required to carry out road speed limit(RSL) programming.

Note:DTCs may be stored in some of the electronic control units(ECUs) during parameter programming.These DTCs should be erased before TechTool is disconnected.

 

Then you will see below screen,check the box “I have read and understand the above advisory”

Then click “Continue”

Then Volvo PTT will check the conditions automatically,then you click “Continue” button

Now it need take a few seconds to identify the vehicle,and it will read parameters

After reading parameter completely,you can find a parameter applying a filter using the options below or by searching for its ID or name.Change the parameter value directly in the table.Click Continue the changed parameter values.

Then click “Parameter Templates”

The parameter templates window will open,let’s click “new” to start add parameter in the template

Begin by naming your template file,then you can enter the key work to search parameters you want

Select the parameters you want,then click arrow to pick it to your template

Note:You also can use “Control Unit”,”Parameter Type”,”Parameter State” to filter the parameter.

 

And the parameter value you add to template can be changed,but you need to pay attention to the Min and Max.

Click “Save” to save the value you changed

And parameter templates allow you to import a template form another.And export yours.

After you finish value changing,click “Apply”.

And you can use “Parameter State” to check the parameter value changed before.

Click continue button

And now you can view the value you change:old and new

Finally,click “Program” when ready to program new value.