This instruction show you guide on how to remove and replace front/steering console for JCB 3CX,4CX,214e,214,215,217 & VARIANTS.
Related Contents:
2024 JCB ServiceMaster 4 v24.3.1 Free Download for Win 10 Win11
2017 JCB Parts Plus+ and Repair Service Manual Free Download
Removal
1 Park the machine on firm level ground, apply the parking brake. Lower the loader arms and excavator to the ground, switch OFF the engine and remove the starter key.
2 Disconnect the battery.
3 Working in the cab, remove the steering wheel as shown.
4 Remove the fixings A (4 off) at positions shown and take off the steering column pedestal cover.
5 Remove the column switches B.
6 Remove the instrument panel C.
7 Remove the fixings D (4 off) securing the front console panel at positions shown and then carefully lift up the front console clear of the steering column assembly.
Replacement
Replacement is the reverse of the removal sequence.
Take care when removing/replacing the console panel to ensure that harnesses do not become snagged and that no other connections have been disturbed.
After re-fitting, operate the front/steering console controls and check they all function correctly.
After ECU reparogramming,it is necessary to write new engine number and machine ID into ECU.So…
PCC1302 PowerCommand Low Coolant Level (Warning or Shutdown) Solution Related Contents: 2024 InPower V14.5…
The function identifies the exhaust temperature and indicates malfunction in the exhaust system. The evaluation…
MTU DiaSys diagnostic software is professional on MTU engine diagnostics and programming.But seems that is…
This instruction show you guide on how to use JPRO Diagnostic to do aftertreatment injector…
There are several different diagnostic vendor adapter support Hyster and Yale forklift truck,here show you…