Here comes guide on how o program a new spared key for BMW CAS3/CAS3+.Hope it helps!
Tools
A laptop
Procedures:
First connect VVDI2 with car and use the old key to turn ignition on. Open the software when I click Connect it automatically show me car information and “connect OK”.
Click Key Learn
Click Get Key Info and I see two options: one add key, one lost all key. I choose Add Key then NEXT.
And it says the dealer key should be taken away. So pull out the old key and I click OK.
It read out all key information. I click Save Key Info below to save the original key data.
Next I choose KeyID3 and click Prepare dealer key with programmer.
It asks me to put new key into programmer. So I put the new key into VVDI2 coil.
Then it asks if the key has keyless, I say no.
New key is made but locked. So as the tips I use the key to start car.
Yes. Car starts successfully as I expected!
Magneti Marelli 49FB – Fiat ECU Pinout More ECU PINOUT Components: ECU Modules Repair…
After ECU reparogramming,it is necessary to write new engine number and machine ID into ECU.So…
PCC1302 PowerCommand Low Coolant Level (Warning or Shutdown) Solution Related Contents: 2024 InPower V14.5…
The function identifies the exhaust temperature and indicates malfunction in the exhaust system. The evaluation…
MTU DiaSys diagnostic software is professional on MTU engine diagnostics and programming.But seems that is…
This instruction show you guide on how to use JPRO Diagnostic to do aftertreatment injector…