This instruction show you guide on how to solve JCB stage V engine K4732 intake air temperature sensor,temperature out of range trouble.
Related Content:
WinEEM4s JCB Service Tool 2.7.2 2.6.1 Free Download
2024 JCB ServiceMaster 4 v24.3.1 Free Download for Win 10 Win11
2017 JCB Parts Plus+ and Repair Service Manual Free Download
Description
The EEM monitoring system has detected that intake air temperature sensor value is implausible.
Possible causes are:
The intake air temperature sensor wiring contact is loose.
The intake air temperature sensor wiring is defective.
The intake air temperature sensor is defective.
Reaction in EEM
The FC is stored and the warning lamp is activated. The CAN message indicates an active fault.
Solution
First save the error log and then do the procedure that follows:
Examine the intake air temperature sensor wiring, the connectors and the contact surfaces of the connector pins (possible oxidation).
Try the operation with another intake temperature sensor to see if the sensor is defective.
It is necessary to do driver installation for JCB DLA 2.0 diagnostic kit,otherwise it can…
Here is the instruction show you guide on how to solve Deutz EMR3 engine fault…
This instruction show you guide on how to solve AGCO machine trouble code 138 SPN…
Here is the instruction show you guide on how to install the left-hand drum bearing…
This instruction show you guide on how to remove and replace loader lift ram for…
This instruction show you guide on how to solve Caterpillar C9 engine 31 84-1 fault…