Here is the instruction show you guide on how to repair JCB backhoe loader 3X/4X/5X B00B729 seat switch signals disagreement.
Related Contents:
WinEEM4s JCB Service Tool 2.7.2 2.6.1 Free Download
2024 JCB ServiceMaster 4 v24.6.2 Free Download for Win 10 Win11
2017 JCB Parts Plus+ and Repair Service Manual Free Download
DTC-FTB Description
Seat Switch Signals Disagreement
Information
Service Procedure
Important: Stop the engine and let it cool before you start work. Do not start the engine during the service procedures. (SN0001)
1 Check for any debris or water inside the connector terminals. This may be as a consequence of pressure washing, loose connectors or poor connector sealing.
2 Check the harness is not damaged and is routed correctly.
3 Check seat harness for correct fitment.
4 The signal may also be checked using ServiceMaster. Switch ignition ON and using Servicemaster BHL machine diagnostics tool, navigate to tab 3.11 ‘Seat Position Status’.
5 There is a disagreement if there is input from both J1-08 and J2-03.
More repair case for JCB,please refer to:JCB Trouble Repair
This instruction show you guide on how to solve Doosan and Bobcat Electric problems can…
It is necessary to do driver installation for JCB DLA 2.0 diagnostic kit,otherwise it can…
Here is the instruction show you guide on how to solve Deutz EMR3 engine fault…
This instruction show you guide on how to solve AGCO machine trouble code 138 SPN…
Here is the instruction show you guide on how to install the left-hand drum bearing…
This instruction show you guide on how to remove and replace loader lift ram for…