After ECU reparogramming,it is necessary to write new engine number and machine ID into ECU.So here car-auto-repair.com show you guide on how to do that.
Related Contents:
Doosan Data Monitoring System DMS-5 DMS-3 Free Download
Doosan e-Doctor 2.4.0.7 2023.06 100% Work
Use EOL Data Function:
You can key in engine No. and machine ID on ECU.
After Reprogramming on ECU, the engine No. and machine ID is not saved on ECU.
The engine No. and machine ID on ECU must be key in the ECU.
Select
– View : Click view icon, you can see the all EOL data.
– Open EOL
. CUID_D_DSID_CUC : Input the Engine Serial Number
. CUID_D_VIN_CUC : Input the Truck Serial Number
Change Data
– Change EOL DATA, Click mouse to ‘□’ of ‘Select’ column.
– Conform the Check and Click ‘Change Data’ to save ECU.
– Can view change data of ECU
* Be sure to STOP engine before changing ECU REPROGRAMING and EOL DATA.
More topics for Doosan,please refer to:Doosan Trouble Repair
This instruction show you guide on how to solve PCC1302 PowerCommand remote emergency stop activated.…
This instruction show you guide on how to use Launch X431 XPROG 3 programmer to…
This instruction show you guide on how to replace engine rotation speed sensor crankshaft for…
This post show you guide on how to install evaporator for CLAAS Lexion 480 combine.…
This instruction show you guide on how to solve Bobcat engine DCU P1A32 Self-Diagnostis in…
How to Use Hyster Yale PC Service Tool Password Management Function Note: To access…