IMMO Service Tool is useful software to shut down the vehicle immobilizer system.It restore the immobilizer’s operability or to completely to make the immo off.
IMMO Service Tool 1.2 100% work download
Note:Before you using IMMO Service Tool,you would better to close the anti-virus software.It maybe make IMMO Service Tool can not work correctly or shutdown.
And IMMO Service Tool support PIN code calculation for some Peugeot and Citroen vehicle models.
How to Use IMMO Service Tool:
Run the IMMO Service Tool and click “Do it ” to load the ECU EEPROM data.
Note:This EEPROM data is read from ECU
Then it will pop-up a window to select the EEPROM data,then click “Open”
Note:It only support Bin file format,YHS file format is un-supported.
Then IMMO Service Tool will take a few minutes to deal with the EEPROM data.It will prompt you with a pop-up window to hint you IMMO off successfully.
Click “Save” to save the new EEPROM data on you laptop.
Finally,you need to write back this EEPROM data you save before to ECU.
Done!
PCC1302 PowerCommand Low Coolant Level (Warning or Shutdown) Solution Related Contents: 2024 InPower V14.5…
The function identifies the exhaust temperature and indicates malfunction in the exhaust system. The evaluation…
MTU DiaSys diagnostic software is professional on MTU engine diagnostics and programming.But seems that is…
This instruction show you guide on how to use JPRO Diagnostic to do aftertreatment injector…
There are several different diagnostic vendor adapter support Hyster and Yale forklift truck,here show you…
For correct use Deutz engine equipped with an SCR exhaust after treatment system is required.Here…