Here car-auto-repair.com show you guide on how to solve P1161 trouble code on resistance error on Liebherr D966 D9512 engine.
Information for engines with serial number UP TO 2018 xx xxxx (12/31/2018):
In the event of failures of NH3 sensors (ID no. 10144038) on the exhaust treatment system of Stage IV engines, the NH3 control unit (ID no. 10144039) must also be replaced ONCE to improve the service life of the NH3 sensor.
Related Contents:
2026 LIEBHERR LiDIA Diagnostic Software
Liebherr Diagnostic Tool with 9 Pin Cable
The sensor will come with an extended heat shrink tubing for improved protection of the trim resistance.This spare parts information applies for engines with a serial number up to 2018 xx xxxx (12/31/2018):all engines with a year of manufacture starting from 2019 are already equipped with the latest version.
• In the event of a sensor failure, the sensor control unit must be replaced ONCE with a new sensor control unit.
• No active conversion is carried out. Replacement only in the event of failure.
• A repair kit with the ID 13489562 is available, it includes the sensor and sensor control unit.
Component location
EATS All versions
D956-D966 A7-04 (SCRonly)
D956-D966 A7-05 StageV (SCRFilter)
EATS All versions
D9512 A7 04-05-StageV
Primary (A700)
Secondary (A760)
AGCO EEM Dosing module Description The dosing module (DM) is installed in the exhaust…
Here is the instruction show you guide on how to solve Caterpillar C9 fault code 64-2…
This instruction show you guide on how to bleed air from the fuel system for…
This instruction show you guide on how to solve Doosan and Bobcat Electric problems can…
It is necessary to do driver installation for JCB DLA 2.0 diagnostic kit,otherwise it can…
Here is the instruction show you guide on how to solve Deutz EMR3 engine fault…