One Porsche 997 2009 year with 52 thousands KM, the driver owner described: the check engine light always on.This article share the way to reset Porsche 997 Engine light on.
Trouble diagnosis: I connect Piwis Tester II to the vehicle and read out these trouble codes:
Porsche PIWIS 2 V18.15 V17.500 Free Download
P0171: System too Lean (Bank 1)
P2195: O2 Sensor Signal Stuck Lean Bank 1 Sensor 1
P2414: O2 Sensor Exhaust Sample Error Bank 1 Sensor 1; V424 received from the HVAC control unit data is invalid; V0101 Communication transmission control unit.
P1628: Transmission control unit communication
P1619: Communication transmission control unit
Read out the real data: as the real data described, the O2 Sensor Bank 1 display mixture too lean, the fuel close to idling of Bank 1 correct adapt (RKAT) to 3%, O2 Sensor 1 still display mixture too lean (as the following table shows), so the control unit display the above-mentioned trouble codes.
Table 1
Serial Number | Data | Range | Before repair | After repair |
L010 | Fuel Correction Average Value | Bank 1 | 13.5% | -1%-0.8% |
L020 | Fuel Correction Average Value | Bank 2 | -0.97%~0.91% | -1%~0.29% |
L070 | O2 Sensor | Bank 1 | 2.8v/0.4v | 2v/0.7v |
L080 | O2 Sensor | Bank 2 | 1.9v/0.4v | 2v/0.6v |
L300 | RKAT | Bank 1 | 3.49% | 0.35% |
L310 | RKAT | Bank 2 | -0.25% | 0.29% |
L320 | FRAU | Bank 1 | 2.00% | -3.23% |
L330 | FRAU | Bank 2 | -4.14% | -2.53% |
L340 | FRAU | Bank 1 | 0.00% | -0.17% |
L350 | FRAU | Bank 2 | -3.78% | -0.13% |
HO10 | Intake air | 19.3kg/h | 14.4kg/h | |
Throttle opening degree | 3 | |||
H040 | correction factor | -3.4%~9.2% | 9.5% |
Trouble code reset: after changing O2 Sensor Bank 1 Sensor 1, the trouble code is reset
Magneti Marelli 49FB – Fiat ECU Pinout More ECU PINOUT Components: ECU Modules Repair…
After ECU reparogramming,it is necessary to write new engine number and machine ID into ECU.So…
PCC1302 PowerCommand Low Coolant Level (Warning or Shutdown) Solution Related Contents: 2024 InPower V14.5…
The function identifies the exhaust temperature and indicates malfunction in the exhaust system. The evaluation…
MTU DiaSys diagnostic software is professional on MTU engine diagnostics and programming.But seems that is…
This instruction show you guide on how to use JPRO Diagnostic to do aftertreatment injector…