Categories: Do It YouselfHow To

How to Replace Engine Air Filter for Benz W204

The air filters protect the air intake system, valves, pistons, cylinder walls, and engine oil from dust and debris that can be sucked in under normal operation. Every 10,000 miles or so, you should change the two engine air filters in your Mercedes-Benz.Here I will show a step-by-step guide on how to replace engine air filter for Benz W204.

 

Time: 30 minutes

Tab: $20 to $60

Tools: T25 Torx driver, rags

 

Applicable Models:

Mercedes-Benz C350 (2008-15) Mercedes-Benz GLK350 (2010-15)

 

Procedures:

Before replacing engine air filters you need to remove the engine cover,and please check:

How to Remove Benz C Class W204 Engine Cover

 

With the cover removed and turned upside down you can see the four clips(red arrows) that hold the cover/air filters in place.

Place the cover upside down on your work bench with a couple of rags under it to protect from getting scratched.The two air filters are located one on each side(red arrows)

Use a T25 Torx and remove the four Torx screws on each air filter housing(red arrows).The screws will not unscrew all the way out from the housing lid.

Remove the old filters and be sure to clean out the air boxes.You do not want to put a clean air in a dirty air box.Installation is the reverse of removal.

auto

Recent Posts

How to Solve AGCO Machine Trouble Urea pressure too high?

This instruction show you guide on how to solve AGCO machine trouble code 138 SPN…

1 day ago

How to Install Left-hand Drum Bearing Assembly for CLAAS LEXION 480

Here is the instruction show you guide on how to install the left-hand drum bearing…

2 weeks ago

How to Remove and Replace Loader Lift Ram for JCB 3CX 4CX Machine

This instruction show you guide on how to remove and replace loader lift ram for…

2 weeks ago

How to Solve Caterpillar C9 Engine Vehicle Speed Loss of Signal Error?

This instruction show you guide on how to solve Caterpillar C9 engine 31 84-1 fault…

3 weeks ago

How to Perform Accumulator Charging/Discharging for JCB 3CX,4CX

This instruction show you guide on how to charge and discharge accumulator for JCB 3CX,…

4 weeks ago

How to Solve PowerCommand PCC2300 Fault Code 143 Low Oil Rifle Pressure

This instruction show you guide on how to to solve PowerCommand PCC2300 trouble code 143…

1 month ago