This is a instruction show you guide on how to remove 24C16 chip for Suzuki SX4 2010-2013 instrument cluster.
Preparations:
DashBook Pro v7.9+SRSBook 1.4 2018 Removal Book 100% Work Solution
Removing the instrument cluster
Unscrew the three screws that secure the steering housing and remove it.
Remove the decorative trim on the center console(with clips)
Unscrew the 4 screws and remove the CD player
Unscrew the 2 screws and remove the cover ventilation(with clips)
Next remove the trim on the instrument panel(with clips)
Unscrew the two screws,remove the instrument cluster
Dismantling the instrument cluster
Remove the rear cover
This instruction show you guide on how to solve Bobcat machine trouble code P18A5 suction…
The measured intake manifold pressure (signal from boost pressure sensor) is below the warning limit…
JCB 3CX 4CX Backhoe Loader engine throttle cable is routed from the L.H. side of the…
Here is the instruction show you guide on how to replace fuel tank breather filter…
FENDT 900 Vario COM III tractor Component B092 - Sensor, charge air pressure/temperature reports the boost…
Deutz EMR3 Engine Trouble Code 87 / 97 / FlFCD WATER IN FUEL Solution Error description…