This instruction show you the guide on how to install/replace new fog led lights for Toyota Camry 2007-2014 by yourself.For more Toyota Camry diy,please check here:Toyota Camry projects.
Note:This article only a guide for this project,please try it at your own risk
What You Need?
Toyota Camry LED Fog Lights (You can choose different on amazon)
Procedures:
User screw driver to remove one fastener out and another is a screw
Use flathead screwdriver to open the shell
Now you can access the fog led light
Disconnect the connector
And remove the fog led light(Turn it left to loose)
Install new fog light and connect the connector
Then use zip tie to tie the wire cable
Now install all thing you remove back
After then repeat same steps for driver side to install LED bulbs
Done!
When you use IDSS diagnostic scan to do some function,it may occur communication error.Sometime you…
Deutz engine EOL test (end of line) is required to ensure the EAT functionality. Conditions…
This instruction show you guide on how to solve Scania truck articulation control system ACS…
Magneti Marelli 49FB – Fiat ECU Pinout More ECU PINOUT Components: ECU Modules Repair…
After ECU reparogramming,it is necessary to write new engine number and machine ID into ECU.So…
PCC1302 PowerCommand Low Coolant Level (Warning or Shutdown) Solution Related Contents: 2024 InPower V14.5…