This instruction will show a case about how to coding a program to close trunk with FOB key via Vediamo for BENZ E-CLASS W212 facelift model 2014-2016.
Please be careful when using programs you could damage your car system if you don’t know what your doing.
Preparation:
Benz Vediamo 5.01.01 +Path+Database Mercedes Free Download
How to Install Mercedes Benz Vediamo Software
Procedures:
Battery charger and MB STAR C4 diagnostic tool connected from OBD II port to laptop
Running software Vediamo and click Vecoute
Click “Change folder”
Find “Program files(x86)”–>”Mercedes-Benz”–>”Xentry”–>”MB_PKW “–>”Caeser”–>”cbf”, click OK
Scroll down and find “PTCM”, click “OK”
Click “Initiate ECU contact”
Click “Code the vanant of an ECU” and correct items , then click “ECU Coding”
Then close and click “Exit ECU contact”
Click “Close the currently selected Vediamo System”
Function is ready, now test it
More cases about Benz, please refer to BENZ.
This instruction show you guide on how to inspect and clean cylinder block for John…
Here is the instruction show you guide on how to remove and replace cab heater…
Here is the instruction show you guide on how to remove differential gear for Fendt…
This instruction show you guide on how to solve International MaxxsForce 7 SPN 27 FMI…
BMW ISTA-D Rheingold 4.54.40/4.02.14 Standalone / SDP 4.02.13 / ISTA-P 3.60.0.600 free download link and…
This instruction show you guide on how to solve Detroit DD13 engine SPN 84 FMI…