Categories: Auto Key Program

How To Add New Key For Porsche Cayenne

Topic:

How To Add New Key For Porsche Cayenne.

Another article related:

Porsche Cayenne 08 All Key Lost add new key Guide

For Porsche Cayenne made before 2004.06:

Read out immobilizer PIN,and then short circuit pin 3 to pin 7 of OBD port with 5053.

Then you can start program key

 

For Porsche Cayenne made from 2004.06 to 2006:

Read the immobilizer PIN by programmer,but it can not program key by common key programmer.(Only by VVDI Programmer or Original manufacturer device)

 

For Porsche Cayenne made from 2007 to 2010:

Some Porsche Cayenne made during this period can do key programed by VVDI device.

And for others,you need to remove the ECU,disassemble the storager chip,near CPU,typed 95160.

Read out the data file by programmer.

Open the data file.

The pin code locate at section 040 and 060,12th and 13th byte.Conver the hex system to decimalism,then you get the PIN.

Read Porsche Cayenne,Tiguan 2009 PIN Code Caculate Guide

Note:Before you program for next key,insert the key to ignition and turn it the “ON” position,but do not start the engine,and wait for 3 seconds,then you will sound the “beep” of unlocking.

Turn off the ignition,and then you can start programming next key.

auto

Recent Posts

How to Solve AGCO Machine Trouble Urea pressure too high?

This instruction show you guide on how to solve AGCO machine trouble code 138 SPN…

2 days ago

How to Install Left-hand Drum Bearing Assembly for CLAAS LEXION 480

Here is the instruction show you guide on how to install the left-hand drum bearing…

2 weeks ago

How to Remove and Replace Loader Lift Ram for JCB 3CX 4CX Machine

This instruction show you guide on how to remove and replace loader lift ram for…

2 weeks ago

How to Solve Caterpillar C9 Engine Vehicle Speed Loss of Signal Error?

This instruction show you guide on how to solve Caterpillar C9 engine 31 84-1 fault…

3 weeks ago

How to Perform Accumulator Charging/Discharging for JCB 3CX,4CX

This instruction show you guide on how to charge and discharge accumulator for JCB 3CX,…

4 weeks ago

How to Solve PowerCommand PCC2300 Fault Code 143 Low Oil Rifle Pressure

This instruction show you guide on how to to solve PowerCommand PCC2300 trouble code 143…

1 month ago