This illustration show you guide on how to perform cruise lever operating force for Kubota L3301 L3901 L4701 excavator.
Related Contents:
2024 Kubota Takeuchi Diagmaster v24.01.06 Software Free Download
Kubota EPC Spare Parts Catalogue 2021.06 Download
Cruise Lever Operating Force
1. Push the cruise control lever (1) into maximum tied position.After that pull it 50 mm (2 in.) back.
2. Measure the force needed to move the cruise control lever back into the maximum position at middle of the lever grip (2).
3. If the force is not within the factory specifications, loosen the lock nut (4) and adjust the tension of cruise spring (3).
4. Retighten the lock nut (4) securely.
Cruise control lever operating force
Factory specification
60 to 100 N
6.2 to 10.1 kgf
14 to 22.4 lbf
(1) Cruise Control Lever
(2) Lever Grip
(3) Cruise Spring
(4) Lock Nut
(5) Damper
More repair case for Kubota,please refer to:Kubota Trouble Repair
JCB 3CX 4CX Backhoe Loader engine throttle cable is routed from the L.H. side of the…
Here is the instruction show you guide on how to replace fuel tank breather filter…
FENDT 900 Vario COM III tractor Component B092 - Sensor, charge air pressure/temperature reports the boost…
Deutz EMR3 Engine Trouble Code 87 / 97 / FlFCD WATER IN FUEL Solution Error description…
This instruction show you guide on how to perform hydraulic flow test for Kubota L3301…
This instruction show you guide on how to configure Lane Departure Warning for Bendix AutoVue…