DST-i Diagnostic Adapter Wireless LAN Connection Setup Guide

This instruction show you guide on how to setup wireless LAN connection for DST-i diagnostic adapter.

 

Related Contents:

2022 Kubota Takeuchi Diagmaster v22.08.01 v4.1.2 Software Free Download

Kubota EPC Spare Parts Catalogue 2021.06 Download

Original Kubota DST-i Diagnostic Tool

 

Steps:

Setting up the DST-i wireless LAN connection on a PC.

1 Launch “DST-iWifiSetupWizard” from the Startup menu.

2 Once Setup Wizard has launched, select the setup procedure and click. Select “Wizard Assisted Setup” or “Advanced Mode Setup”.

The following explains what happens when selecting “Wizard Assisted Setup”.

3 Connect the DST-i to the PC by the USB cable.

4 Turn the DST-i mode switch to ON.

5 After the DST-i top screen appears, click “Next”.

 

Setup for infrastructure mode

1 Select the setup items from the drop down menu. The following settings will depend on existing IT/Company  parameters:

1. SSID
2. Network Key
3. IP Address
4. Subnet Mask
5. After setup is complete, click “Save and Next”.

 

 

Setup in Adhoc mode

1 Select the setup items from the drop down menu. The following Setting will depend on existing IT/Company parameters

1. SSID
2. Network Key
3. Channel

 

2 After setup is complete, click “Save and Next”.

Select the default setting (Infrastructure or Adhoc) and click “Complete”.