DLB can be used to set the Odometer Value in the LCD display.This article show a guide on how to use Diamond Logic® Builder to program instrument cluster odometer value.
Preparations:
Navistar Diamond Logic Builder (DLB) Free Download
How to Install Navistar Diamond Logic Builder (DLB) Software
Main Procedures:
Step 1:In the menu bar, select Tools > Set Odometer.
The Set Odometer window appears.
Step 2:Read and follow the instructions in the Set Odometer window. Then, select the appropriate option for setting the odometer.
JCB Engine Fault Derate When a fault is detected, the ECU determines the severity of…
Here is a instruction show you guide on how to solve Liebherr ECU 2 D966…
AGCO EEM5 DEF Suction Module Tank sensor (CAN) The DEF suction module with the CAN-bus…
This instruction show you guide on how to remove the threshing drum for CLAAS Lexion…
This instruction show you guide on how to display service menu for Hitachi ZX890-7 excavator.…
Here is the instruction show you guide on how to do Advanced Tool Select and Basic…