After the washing throttle is powered off: engine acceleration slow, engine stalls (after start); engine acceleration slow (return to idle).So here car-auto-repair.com will show you guide on how to use Launch X431 device to program throttle idle speed for Cadillac SRX 2011.
What You Need?
Operations Procedures:
1.Choose Special Function.
2.Choose throttle matching V10.46 or a later version.
3.Choose domestic cars.
4.Choose Shanghai GM.
5.Choose Throttle Matching.
6.Choose Manual Selection.
7.Choose Minibus.
8.Choose CADILLAC.
9.Choose SRX.
10.Choose 2011.
11.Choose Type 1.
12.The system displays the idle learning resetting conditions. After checking that the conditions are met,click OK.
13.Click OK to start resetting the throttle.
14.Resetting is complete. Click OK.
15.Turn off ignition. The idle speed and acceleration are normal. The throttle matching service process is complete.
More test report about Launch X431 please check:Launch X431 Test report
Detroit DD13 EPA10 (2010-13) trouble code SPN 84 FMI 13 (MCM) J1939 Wheel-based vehicle speed…
This instruction show you guide on how to solve Caterpillar C9 engine trouble code 36…
Kubota L3301 L3901 Excavator Safety Valve Setting Pressure Test Using Injection Nozzle Tester 1 Remove…
JCB Engine Fault Derate When a fault is detected, the ECU determines the severity of…
Here is a instruction show you guide on how to solve Liebherr ECU 2 D966…
AGCO EEM5 DEF Suction Module Tank sensor (CAN) The DEF suction module with the CAN-bus…