A loud cracking noise from the front door power window regulator occurs when opening or closing the right side or left side window. BMW I8(I12) window regulator noise when opening or closing side window.This instruction show you guide on how to solve it.
Related Contents:
2024.04 BMW Rheingold ISTA+ 4.46.42 4.23.14 ISTA-P 3.71 Free Download
BMW E-sysPlus 3.8/3.33.0/3.32.1 Coding Software Free Download
Cause:
Faulty power window regulator
Procedures:
Inspect the cable housing of the front power window regulators. The picture shows a good cable housing. No black bushing is showing outside of the cable white housing.
If the inspection of the cables shows damage to the black bushing, and it is extended out of the white cable housing, then replace the affected window regulator. Refer to ISTA repair instructions 51 33 000 Remove and install/replace the power window regulator in the left or right front door.
Part Number
51 33 7 401 657 Window lifter without motor, front left x1
51 33 7 401 658 Window lifter without motor, front right x1
And more BMW cases please refer to:BMW trouble repair.
Magneti Marelli 49FB – Fiat ECU Pinout More ECU PINOUT Components: ECU Modules Repair…
After ECU reparogramming,it is necessary to write new engine number and machine ID into ECU.So…
PCC1302 PowerCommand Low Coolant Level (Warning or Shutdown) Solution Related Contents: 2024 InPower V14.5…
The function identifies the exhaust temperature and indicates malfunction in the exhaust system. The evaluation…
MTU DiaSys diagnostic software is professional on MTU engine diagnostics and programming.But seems that is…
This instruction show you guide on how to use JPRO Diagnostic to do aftertreatment injector…