Lane assist helps the driver to stay in lane alerting the driver if the vehicle moves OFF lines. The system is operational as soon as the camera detects road markings.In this example,car-auto-repair.com show you guide on how to use OBDeleven OBD2 adapter to activate driver lane assist for Audi Q7.
The system is designed for driving on motorways and main roads and works at speeds above approx. 60 km/h. Lane assist does not actively intervene in the driving situation.
Preparations:
OBDeleven VAG Car Diagnostics App Free Download
OBDeleven OBD2 Adapter (Amazon Official Shop)
Procedures:
Connect OBDeleven adapter to Audi Q7 obd port
Press “Connect” button
Press “Apps” in the bottom,then select “Lane assist Step1”
Now here,press “CHANGE VALUE”
And the select “Activated”,press “ACTIVATE” button
After then back to apps menu to select “Lane assist step2”
Press “CHANGE VALUE”
Select “Active with LD button”,then press “ACTIVATE”
Now driver lane assist activation done
For more topic about Audi Q7,please refer to AUDI Q7 Trouble Repair
PCC1302 PowerCommand Low Coolant Level (Warning or Shutdown) Solution Related Contents: 2024 InPower V14.5…
The function identifies the exhaust temperature and indicates malfunction in the exhaust system. The evaluation…
MTU DiaSys diagnostic software is professional on MTU engine diagnostics and programming.But seems that is…
This instruction show you guide on how to use JPRO Diagnostic to do aftertreatment injector…
There are several different diagnostic vendor adapter support Hyster and Yale forklift truck,here show you…
For correct use Deutz engine equipped with an SCR exhaust after treatment system is required.Here…