This instruction show you guide on how to solve AGCO machine trouble code SPN 1136 FMI 02 ECU temperature NO SIGNAL.The measurement has failed inside the ECU.
Related Contents:
AGCO 2×4 CANUSB Interface Diagnostics
2026 AGCO EDT Electronic Diagnostic Tool
Failure Mode Indicator
FMI 02 – Data erratic, intermittent or incorrect.
Failure Mode
Fault code is stored and warning is activated. CAN message indicates active fault. Engine functions dependent on the ECU temperature are not active.
Possible Cause
Diagnosis and Solution
Check the ECU operation with another EEM3 controller. If the system is functional and the fault is not active with the replacement ECU, then the original ECU is defective.
More AGCO machine repair case,please refer to AGCO Machine Repair
Here car-auto-repair.com show you guide on how to solve P1161 trouble code on resistance error…
AGCO EEM Dosing module Description The dosing module (DM) is installed in the exhaust…
Here is the instruction show you guide on how to solve Caterpillar C9 fault code 64-2…
This instruction show you guide on how to bleed air from the fuel system for…
This instruction show you guide on how to solve Doosan and Bobcat Electric problems can…
It is necessary to do driver installation for JCB DLA 2.0 diagnostic kit,otherwise it can…