This instruction show you guide on how to diagnose Scania truck Articulation control system right-hand damping cylinder ACS 16 error.
Related Contents:
2024.07 Scania SDP3 V2.61.2 V2.40 Diagnostic Software Free Download
Scania VCI3 Diagnostic Adapter Full Chips
2024 2018 Scania Multi EPC Parts Catalogue Free Download
Right-hand damping cylinder, ACS
Error identification
The oil pressure in the right-hand damping cylinder deviates from the expected value. The expected pressure is calculated using the right-hand pressure sensor and the articulation angle during driving.
Cause
Oil leaks in the right-hand damping cylinder.
Notes
The ACS warning indication is displayed. Limp home mode will be activated.
Action
Check the angle sensor, right-hand pressure sensor and associated cable harnesses for defects.
If the fault persists, renew the right-hand damping cylinder.
For more information about Scania truck,please refer to:Scania Trouble Repair.
This instruction show you guide on how to solve spool brake solenoid open circuit for…
This instruction show you guide on how to remove and install crankshaft rear seal for…
This instruction show you guide on how to use JPRO diagnostic to do SCR performance…
Here is the instruction show you guide on how to remove and disassemble master cylinder…
This instruction show you guide on how to solve Deutz EMR engine 71 / 2791 /…
Here is the instruction show you guide on how to repair P0731 incorrect 2nd gear ration…