QSK60 G CM2358 Fault Code 1362 Engine Oil Filter Differential Pressure

This instruction show you guide on how to solve QSK60 G CM2358 engine oil filter differential pressure- Data Valid But Above Normal Operating Range – Moderately Severe Level.

 

Related Contents:

INSITE 8.9.2 Engine Diagnostic Software

Cummings INLINE 6 Diagnostic Adapter

 

 

Fault Code: 1362
PID: P99
SPN: 99
FMI: 0/16
LAMP: Amber

 

Reason: High oil filter restriction has been detected.

Effect: None on performance.

 

Circuit Description

The engine control module (ECM) uses the oil filter intake pressure sensor and engine oil pressure sensor to determine the oil filter restriction.

 

Component Location

The oil filter intake pressure sensor is located on the oil filter housing.

The engine oil pressure sensor is located on the outlet of the oil filter head.

 

Conditions for Running the Diagnostics

This diagnostic runs continuously when the engine is running.

 

Conditions for Setting the Fault Codes

The Engine Control Module (ECM) detected high oil filter restriction.

 

Action Taken When the Fault Code is Active

The ECM illuminates the amber CHECK ENGINE lamp immediately when the diagnostic runs and fails.

 

Conditions for Clearing the Fault Code

To validate the repair, perform a key cycle, start the engine and let it idle for 1 minute.

The ECM will turn off the amber CHECK ENGINE lamp immediately after the diagnostic runs and passes.

 

The fault code status displayed by the recommended electronic service tool or equivalent will change to INACTIVE immediately after the diagnostic runs and passes.

 

More repair case for QSK60 CM2358,please refer to QSK60 CM2358 Trouble Repair