When you plug MTU USB to CAN diagnostic adapter to your PC,and run MTU DiaSYS diagnostic software,but without communication between PC and MTU USB to CAN diagnostic adapter.It may be a driver error.
Related Contents:
2022 MTU DiaSys 2.74 2.72 Engine Diagnostic Software Free Download
MTU USB to CAN Diagnostic Adapter Communication Error:
There is an unknown device and give a “?” mark on the name
So you need to download driver to re-install it,after then you will find the diagnostic adapter to PC communication error solved.
Notice:during driver installation please disconnect MTU Engine USB to CAN diagnostic adapter.
MTU USB to CAN Diagnostic Adapter Driver Download here
It is necessary to do driver installation for JCB DLA 2.0 diagnostic kit,otherwise it can…
Here is the instruction show you guide on how to solve Deutz EMR3 engine fault…
This instruction show you guide on how to solve AGCO machine trouble code 138 SPN…
Here is the instruction show you guide on how to install the left-hand drum bearing…
This instruction show you guide on how to remove and replace loader lift ram for…
This instruction show you guide on how to solve Caterpillar C9 engine 31 84-1 fault…