This instruction show you guide on how to use iProg Pro programmer to change mileage for Haval H6 70F3529 via obd.
Preparations:
Newest iProg Pro Plus iProg+ v84 v82 Free Download
Procedures:
Connection iProg programmer to Haval H6 by obd
Run iProg pro software,then select “Haval H6_(70F3529)”
Then click “Read EEPROM”
Input new value “123456” and click “Change KM”
Then click “Write KM Only”
EEPROM Write OK
Then instrument cluster will restart,then it will show you with new value.
Done.
PCC1302 PowerCommand Low Coolant Level (Warning or Shutdown) Solution Related Contents: 2024 InPower V14.5…
The function identifies the exhaust temperature and indicates malfunction in the exhaust system. The evaluation…
MTU DiaSys diagnostic software is professional on MTU engine diagnostics and programming.But seems that is…
This instruction show you guide on how to use JPRO Diagnostic to do aftertreatment injector…
There are several different diagnostic vendor adapter support Hyster and Yale forklift truck,here show you…
For correct use Deutz engine equipped with an SCR exhaust after treatment system is required.Here…