Here is step-by-step guide on how to use TOOL32 software to delete lost keys for BMW cars.
Related Contents:
Mike’s Easy BMW Tool Download & Installation on Win XP/7/8/10/Vista
BMW Coding/Flashing/Progrmming PDF+Video Guide
2024.08 BMW Rheingold ISTA+ 4.48.40 4.23.14 ISTA-P 3.71 Free Download
Procedures:
1.Run Tools 32 and load CAS.prg file
2.Search “Status-aktuell_Schluessel”,double click it.You can get key number in right side “key_number”
3.Search “statusschluessel_frei_gesperrt” and double click it perform.Now you can get keys stored in CAS.If there are two keys working,please go to Step 4.Otherwise you need use another working key to read the key information,then you will know how many key license and CAS keys license stored.
4.Search “steuern-schluessel_gesperrt”.
The parameter value is keys number.
Input which key you lost,key 1 or key 2,and click “Clear” to delete.
5.Search “Statusschluessel_frei_gesperrt”,and double click to perform.
Now you need check if the key have been locked.
This instruction show you guide on how to solve Doosan Stage V excavator U013C trouble…
This instruction show you guide on how to solve spool brake solenoid open circuit for…
This instruction show you guide on how to remove and install crankshaft rear seal for…
This instruction show you guide on how to use JPRO diagnostic to do SCR performance…
Here is the instruction show you guide on how to remove and disassemble master cylinder…
This instruction show you guide on how to solve Deutz EMR engine 71 / 2791 /…