How to Use SerDia2010 to Perform EGR Cooler Exchange for Deutz Engine

If you want to do initialization the Service Case EGR cooler exchange must be performed after the EGR cooler exchange by SERDIA2010.

 

Handling in service in the case of an exchange of the EGR cooler to the engine of the BR 2.9 and 3.6 T4i DOConly.

 

Related Contents:

2023 Deutz Serdia2010 v14.1.9.1 Diagnostic Software Free Download

Deutz Diagnostic Kit DECOM for Deutz Engine

 

By replacing the EGR cooler through the service, also the moment (hours of operation) of exchange must be stored in the engine control unit to reinitialize the term-dependent aging function of the EGR cooler.

Press “Set time cooler exchange” button

Current operating hours are taken and written as the date of the cooler exchange into the control unit

Operation completed

 

Consequence when the term-dependent aging function of the EGR cooler is not initialized or initialized at the wrong time:
EGR cooler is changed without runtime adjustment in the control unit
– EGR correction is not active
– High smoke values
– Particulate emissions are exceeded
– If necessary, lack of power
EGR cooler is not changed and term-dependent aging function is still activated
– EGR correction is active
– High NOx emissions (the limit is exceeded)

 

More topic for Deutz,please refer to Deutz Trouble Repair