How to Uninstall Audi MMI MAP Keldo’s Activator

This article show a guide on how to uninstall Audi MMI map activator (Uninstall Keldo’s activator from MMI),hope it helps!

 

Related Contents:

How to Update Audi MMI Map

How to Active Audi MMI Map:3G &3 GP

How to update Audi MMI 3G Firmware

How to Enable Audi MMI Green Menu (Hidden Menu) by VCDs & Script

 

Download the uninstaller script

https://mega.nz/#!xY4XkQYD!7UG0rfukWgukRuybgivHeQLkwQfJeOWN532qh4dR1ZU

 

Format your SD in FAT32.

Transfer uninstaller files to the SD card root:

Caution: Do NOT insert the SD until MMI has fully booted.The uninstall script only works with SD, it doesn’t work with USB.Remove all devices from car (Others SD, USB…) for avoid errors.

 

Start the car and wait until MMI is fully loaded (usually 5-10 minutes)

Make sure that MMI is fully booted (press all buttons once RADIO CAR NAV MEDIA TEL).

Wait until all options are working (no options in gray) even when all options are working wait a minute more.

Insert the SD card into the first MMI slot.

A screen will appear

Press any key (usually the one big knob)

Don’t touch anything

Wait 15-60 seconds, if everything is done according to the instructions, the next screen will appear:

Remove the SD card (for avoid re-run the script) and reboot the MMI.

Reboot Your MMI

MMI 2G                 SETUP + Main (Big) Button + Top Right Button

MMI 2G (A8)        TEL + Main (Big) Button + Top Right Button

MMI 3G                 SETUP + Main (Big) Button + Top Right Button

MMI 3GP               MENU + Main (Big) Button + Top Right Button

MMI 3GP (A1)       TONE + Main (Big) Button + Top Right Button

RMC (A1/Q3)         BACK + Main (Big) Button + Top Right Button

RMC (A6/A7)         MENU + Main (Big) Button + Top Right Button

MIB                          MENU + Main (Big) Button + Top Right Button

auto

Recent Posts

Valtra BH Series 140-210 Trouble Internal Roll inertial Sensor Fault

This instruction show you guide on how to solve Valtra BH Series 140-210 trouble code SA…

1 week ago

Caterpillar C9 Engine Throttle Position Out of Calibration 28 91-13 Trouble Solution

This instruction show you guide on how how to solve trouble code 28 PID 91-13…

1 week ago

Magneti Marelli 1 AVB-VW ECU Pinout

Vehicles: With AP 1.6, 1.8 and 2.0 Ml engines DE 97 to 99. And for…

2 weeks ago

Valtra BH Series 140-210 Internal lateral Inertial Sensor Recalibration

This instruction show you guide on how to solve Valtra BH Series 140-210 trouble code SA…

2 weeks ago

Bendix AutoVue 3G LDW System Driver Assistance Systems (DAS) Tests

JPRO 2025V3 Driver Assistance Systems (DAS) Tests allows the editing of configuration parameters.   Related Contents:…

2 weeks ago

How to Solve PCC2300 PowerCommand Membrane Buttons Not Functioning

This instruction show you guide on how to solve PCC2300 Powercommand Membrane buttons not working.…

3 weeks ago