Categories: Auto Repair

How to Replacing Cabin Filter and Cleaning AC evaporator on Volvo

Before a hot summer comes, it needs to clean AC of vehicle annually. This post will show you guide on how to replacing cabin filter and cleaning AC evaporator on Volvo.

 

Procedures:

Remove the kick panel at the bottom, unscrew screws and pull out the panel

Disconnect the connector for the lighting

Remove the glove box we need to unscrew a few screws to do it the bottom top 25 and then you have four around the perimeter same torques 25 screws.

Last two bolts which are inside the glove box, which are two eight millimeter bolts

Pull carefully on the glove box and disconnect the lighting connector and another unused connector on the left

Pull out side panel straightly

Disconnect the connector from this block

Pull on the carpet and remove the block, you need to push on this button and then pull on the block, it will release

Remove the cover

Take out the cabin filter

Spreading the cleaning product all over the evaporator

Close the cover

It takes 15 minutes for cleaning product work, let it soak and drain slowly. After that, start the car, turn the AC on, put the fan all the way to the maximum and turn on the recirculation of the air.

Let it run 10-15 minutes to dry the evaporator.

Once complete your evaporator should be nice clean and dry, reinstall the new cabin filter.

Everything back in reverse.

More cases about Volvo, please refer to Volvo Trouble Repair.

 

Kevin

Recent Posts

Scania Truck ALM 000463 Motion and Inclination Detector,Calibration Fault

This instruction show you guide on how to solve Scania truck motion and inclination detector,…

2 weeks ago

How to Solve JCB Excavator C130C-13 Spool Brake Solenoid Open Circuit

This instruction show you guide on how to solve JCB excavator 140 C130C-13 spool brake solenoid…

2 weeks ago

Scania Truck ALM Alarm System ALM404 Fault in the CAN Communication Solution

Scania truck fault in the CAN communication with the chassis management system (CMS),this instruction show…

4 weeks ago

Perkins Phaser/1000 Series Engine New Water Pumps Changed

The water pumps used on all Phaser/1000 Series engines have been changed. The changes to…

4 weeks ago

Deutz Engine EMR3 Request of Engine OFF Error Solution

Here is the simple instruction on how to solve Deutz engine EMR3 trouble code 48…

1 month ago

How to Use Cat ET 2025A Power Shift Pressure Test Function?

CAT ET 2025A Power Shift Pressure Test function checks whether that the proportional reducing valve is…

1 month ago