Categories: Do It Youself

Ford Mondeo Power Window Resetting After Battery Disconnecting

It know to us that power window need to be resetted when battery disconnecting.And this small article talk about how to reset the power window for Ford Mondeo after battery disconnecting.

 

Procedures of Ford Mondeo Power Window Resetting:

1.Hold down the down switch until the window is fully lowered,and keep it several seconds.

2.Release the switch momentarily, and then press down again for 1 seconds,repeat about 2~3 time.

3.Hold down the up switch of power window until the window is fully raised,and keep holding about several seconds.

4.Release the switch momentarily, and then press up again for 5 seconds

 

Then this window has been reset,and you need to repeat below procedures to complete other window resetting.

auto

Recent Posts

How to Remove and Replace Loader Lift Ram for JCB 3CX 4CX Machine

This instruction show you guide on how to remove and replace loader lift ram for…

1 day ago

How to Solve Caterpillar C9 Engine Vehicle Speed Loss of Signal Error?

This instruction show you guide on how to solve Caterpillar C9 engine 31 84-1 fault…

4 days ago

How to Perform Accumulator Charging/Discharging for JCB 3CX,4CX

This instruction show you guide on how to charge and discharge accumulator for JCB 3CX,…

2 weeks ago

How to Solve PowerCommand PCC2300 Fault Code 143 Low Oil Rifle Pressure

This instruction show you guide on how to to solve PowerCommand PCC2300 trouble code 143…

2 weeks ago

How to Solve HINO J05E Engine P007B Intake Air Temperature Sensor Error

Here is the instruction show you guide on how to solve HINO J05E engine P007B…

3 weeks ago

AGCO EEM5 Stage V CORE 75-80 Supply Module

The supply module (SM) is a part of the vehicle SCR system. The SM is…

3 weeks ago