Toyota Corolla 2013+ Keyless Go All Keys Lost Programming by Zed-Full

This article show you guide on how to use Zed-Full perform all keys lost programming for Toyota Corolla 2013+ Keyless Go Keys.

 

Procedures:

Plug Zed-Full to Toyota Corolla obd port

Select “OBD Application”

Toyota Lexus–>EUROPA–>Keyless

 

Select “ZFH-UTE Programming” and click “Continue” button

Keep the driver side door open,turn ignition OFF and click continue button

During this process working keys data is being transferred to Zed-Full

Now connect “ZFH-C15” cable to the Zed-Full “External Port” on one end and to “ZFH-TUE” emulator on other end

Press “Continue”

Connecting to the “ZFH-UTE” emulator

Working key data is being stored to the “ZFH-UTE” emulator

Try turning ignition on with “ZFH-UTE” emulator by touching the start/stop button with it.

Then click “Yes” to continue

Note:If the ignition won’t turn on,press “No” button then repeat the procedure,sometime it need try several times.

Press “Continue” to program a new key

Open driver’s side door,turn ignition on with “ZFH-UTE” then press “Continue” button

Hold the “ZFH-UTE” emulator close to the start/stop button.When the car chimes,take the key away from the start /stop button

Now hold the new key against the start/stop button where emblem side faces the button

When the car chimes twice take the ke away from the button

 

Now Zed-Full immobilizer is proceed,please wait

After then it will prompt key programmed successfully

Now you can test key on car.