This instruction show you guide on how to use JLR PATHFINDER to code for Land Rover Range Rover L494 2017 keyless access retrofit.
Preparations:
JLR Pathfinder Free Download and Installation
How to Install Jaguar & Land Rover JLR Pathfinder on Win7 and Win 10
Procedures:
Connect JLR VCI DoIP to Range Rover L494,and run JLR PATHFINDER
After vehicle identification,click “ECU Diagnostics”
Select “Remote Function Actuator (RFA)”
Click “ECU Replacement”
Follow the PATHFINDER prompt message to finish keys programming,after programming it will work.
Note:Keyless module recommend use new module,if used keyless module applied,please flash a new data for the used keyless module.
This instruction show you guide on how to inspect and clean cylinder block for John…
Here is the instruction show you guide on how to remove and replace cab heater…
Here is the instruction show you guide on how to remove differential gear for Fendt…
This instruction show you guide on how to solve International MaxxsForce 7 SPN 27 FMI…
BMW ISTA-D Rheingold 4.54.40/4.02.14 Standalone / SDP 4.02.13 / ISTA-P 3.60.0.600 free download link and…
This instruction show you guide on how to solve Detroit DD13 engine SPN 84 FMI…