It is necessary step to remove electrical connection cable before you do disassemble or some other operation on brake.Here car-auto-repair.com guide you.
Related Contents:
Jungheinrich JETI ForkLift Judit-4 v4.37 4.34 2023 Free Download
Jungheinrich JETI ET 4.37 4.34 EPC 2023 Free Download
2023 Jungheinrich Forklift JETI SH v4.36 v4.34 Service Free Download
Disassembling the electrical connection of the spring-loaded brake
Requirements
– Truck parked securely – see operating instructions.
Procedure
Detach the battery connector – see operating instructions.
Undo the cable clamps (6).
Undo the screw connections (2) on the terminal box cover (1)
Undo the plug connection (3) of the electrical connection (5)
Requirements
Truck parked securely – see operating instructions.
Spring-loaded brake is fited – see service manual module 001 002 062 00003.
Procedure
Establish the electrical plug connection.
Apply the terminal box cover (1) with the notches (2) facing downward. Ensure that no cables are trapped.
Establish the screw connections of the terminal box cover.
Secure the electrical connection with cable clamps.
Insert the battery and connect the battery connector.
Test the function of the spring-loaded brake.
For more Jungheinrich trouble repair case,please refer to Jungheinrich Trouble Repair
This instruction show you guide on how to remove and install crankshaft rear seal for…
This instruction show you guide on how to use JPRO diagnostic to do SCR performance…
Here is the instruction show you guide on how to remove and disassemble master cylinder…
This instruction show you guide on how to solve Deutz EMR engine 71 / 2791 /…
Here is the instruction show you guide on how to repair P0731 incorrect 2nd gear ration…
Here is the how to use guide on Caterpillar machine misfire detection test by CAT…