Nexiq eTechnician provides a number of special tests to assist you with your vehicle diagnostic efforts. Most tests require you to connect eTechnician to a running vehicle.The tests available differ depending on the module to which you are connected.
Related Contents:
NEXIQ USB Link 2 Diagnostic Kit with Full Cables
2023 Nexiq eTechnician 2.8 2.1 1.1 Diagnostic Software Free Download
From the Tests tab you can:
• View of list of available tests for the modules to which you are currently connected.
• View Test Information for each test listed.
• Select a test and run it.
To view the list of available tests:
1 Click on the Tests tab on the left side of the display
2 Use the scroll bar on the right side of the screen to scroll down through the list of available tests.
3 Click on the Info icon for a particular test (e.g., EGR Cooler Bypass Valve) to learn more about the test.
A Test Information screen for that test is displayed.
4 Review the information, including any Test Tips that might be included.
5 (optional) Click Print to send the information to a printer.
NOTE:
i If you are not connected to a printer, you can save the information to a file in the location of your choice.
6 Click Close to return to the list of available tests
Running a Test
Most special tests operate the same or in a similar way. The following screens are for illustration only.
To select a test and run it:
1 Start at the list of available tests.
2 Click on a test to select it (e.g., Fuel Pressure Control).
Some tests have preconditions that must be met before you can start the test (e.g., a required engine speed, or specific engine coolant temperature).
Should you encounter a message of this type, click Quit, meet the precondition, and select the test again.
Other tests open directly once you select them.
3 Click Start to begin the test, and follow any on-screen prompts.
4 Click Quit to end the test.
The list of available test is displayed again
This instruction show you guide on how to remove and install crankshaft rear seal for…
This instruction show you guide on how to use JPRO diagnostic to do SCR performance…
Here is the instruction show you guide on how to remove and disassemble master cylinder…
This instruction show you guide on how to solve Deutz EMR engine 71 / 2791 /…
Here is the instruction show you guide on how to repair P0731 incorrect 2nd gear ration…
Here is the how to use guide on Caterpillar machine misfire detection test by CAT…