Categories: Auto Software Error

How to Solve ETKA 8 Path not Found Error

Some my blog readers sent emails to me ask for the solution of ETKA 8 Path not found error.So here I put the solution here,hope it helps!

Legally access a host of manufacturer parts data at www.partslink24.com

ETKA 8 Free Download Install on Win 7/8/8.1/10

 

ETKA 8 Path not found error Solution Steps:
1) Once you’re done installing Etka 8.0, restart your computer
2) When your system boots up again, DO NOT OPEN THE ETKA SHORTCUT ON YOUR DESKTOP
3) Delete the ‘ETKA’ shortcut from your Desktop
4) Then navigate to  C:/ETKA/PROG and make a shortcut of the EtStartn.exe and copy the new shortcut to your Desktop
5) After that download the attachment ‘ETK8_2018-V1_CORRECTION-INT.rar’, extract ‘ETK8_2018-V1_CORRECTION-INT.exe’ on your Desktop, and double click the file

Finally, open ETKA from the newly created shortcut on your Desktop.

 

Note: You have to disable your Antivirus when extracting ‘ETK8_2018-V1_CORRECTION-INT.exe’, cause some Antivirus software recognize it as a trojan (but it’s not).

 

How to Update ETKA’s Data
Don’t forget to thank KrAzYtHeBoY post and +rep him.
If you get stuck when the setup will request you to install ETKA 8.1:

1.Prerequisite:  The folder “C:\ETKA\PROG\IX\” is available in your ETKA Folder.

2.Copy the contents of the folder “C:\ETKA\PROG\IX\PROG\”   to   “C:\ETKA\PROG1\” and overwrite the existing files.

3.Copy the contents of the folder “C:\ETKA\PROG\IX\DATA\”   to   “C:\ETKA\DATA\” and overwrite the existing files.

4.Copy the contents of the folder “C:\ETKA\PROG\IX\PROG\”   to   “C:\ETKA\PROG2\” and overwrite the existing files.

Then once you are done copying the files, try to run the installer C:\ETKA\PROG\IX\ETKA_81_Install.exe. It will fail again with an error message ‘No etka8 instalation was found’. Close all the open windows and start ETKA again, it should have the 8.1 version. From there let the system continue with the updates.

Edit1: Added credits to isdochegal for sharing the etka patch file
Edit2: Added credit to planet-fireball
Edit3: Added credit to spec8

auto

Recent Posts

How to Inspect and Clean Cylinder Block for John Deere PowerTech 9.0 OEM Engine

This instruction show you guide on how to inspect and clean cylinder block for John…

2 days ago

How to Remove and Replace Cab Heater Controls for JCB 3CX Loader

Here is the instruction show you guide on how to remove and replace cab heater…

3 weeks ago

How to Remove Differential Gear for FENDT 900 Vario COMIII

Here is the instruction show you guide on how to remove differential gear for Fendt…

4 weeks ago

International MaxxForce 7 SPN 27 FMI 4 EGRP Signal Out of Range Low

This instruction show you guide on how to solve International MaxxsForce 7 SPN 27 FMI…

4 weeks ago

2025.08 BMW ISTA 4.54.40/4.02.14 ISTA-D Rheingold for BMW ICOM

BMW ISTA-D Rheingold 4.54.40/4.02.14 Standalone / SDP 4.02.13 / ISTA-P 3.60.0.600 free download link and…

4 weeks ago

Detroit DD13 SPN 84 FMI 3 MCM Vehicle Speed Sensor Open Circuit

This instruction show you guide on how to solve Detroit DD13 engine SPN 84 FMI…

1 month ago