Some readers sent emails to said that their Ford F150 got wrench and P160A diagnostic trouble code when they changing tire size on ’17 or ’18.So there i want to share the guide on how to use FORScan to solve this problem.
Preparations:
FORScan Android/iOS/Window Free Download
How to Install & Configure FORScan for OHP ELMconfig
How to Use FORScan to Backup Module Data File
OBDLink MX Bluetooth or OHP Ford ELMconfig USB
Solution:
To fix this, after you do the tire size change in BCM go into the programming screen in FORScan and run the top procedure called “PCM Module Initialization/relearn vehicle data.” If you also see an option in the programming screen called something like “TCM relearn” (2018s) run that afterwards.
If you don’t see the “PCM Module Initialization/relearn vehicle data” option in the programming screen then you’re using an older version of FORScan and you need to install the newest one.
This instruction show you guide on how to inspect and clean cylinder block for John…
Here is the instruction show you guide on how to remove and replace cab heater…
Here is the instruction show you guide on how to remove differential gear for Fendt…
This instruction show you guide on how to solve International MaxxsForce 7 SPN 27 FMI…
BMW ISTA-D Rheingold 4.54.40/4.02.14 Standalone / SDP 4.02.13 / ISTA-P 3.60.0.600 free download link and…
This instruction show you guide on how to solve Detroit DD13 engine SPN 84 FMI…