Heavy Equipment Repair

Fendt 1100MT Tractor Code SA 00 SPN 3361 FMI 03

This instruction show you guide on how to solve Fendt 1100MT tractor trouble code SA 00 SPN 3361 FMI 03.Short circuit to high source on DEF dosing valve low side.

Preparations:

AGCO EDT 2024

AGCO 2×4 CANUSB

 

Diagnosis and solution

Clear the error log.

Restart the engine module.

 

If the fault code shows again during the next driving cycle, check the following.

Check the DEF dosing valve harness. Make sure the connections are good and the contacts are clean.

 

Replace the DEF dosing valve. If the system is correct and the fault is not active, the original DEF dosing valve is bad.

AGCO EDT Electronic Diagnostic Tool

auto

Recent Posts

How to Remove Second Tank for CLAAS AXION 960-920 Tractor

This instruction show you guide on how to remove second tank for CLAAS AXION 960-920…

2 days ago

Doosan Excavator P0408 Maximum EGR Rate Governor Deviation Error Solution

This instruction show you guide on how to solve Doosan excavator P0408 maximum EGR rate…

5 days ago

How to Calibrate 2403 Steering Valve for Fendt 800 S4 Tractor

Here is the instruction show you guide on how to calibrate 2403 steering valve for…

1 week ago

Massey Ferguson Tractor Electrohydraulic Spool Valves Configuration

This function requires all connectors to be disconnected from all electrohydraulic valves on the tractor.You…

1 week ago

How to Remove Center Joint and Center Frame for HITACHI Hitachi EX5600-7B

This instruction show you guide on how to remove center joint and center frame for…

2 weeks ago

How to Repair Doosan Machine P0100 DTC Signal Error

How to solve Doosan heavy duty machine P0100 fault code signal error of air mass…

3 weeks ago