Bendix EC-60 EC-80 Drag Torque Test by JPRO

This instruction show you guide on how to perform drag torque test for Bendix EC-60 EC80 by JPRO Diagostics.

 

Related Contents:

2024 JPRO Noregon Commercial Fleet Diagnostics Free Download

Noregon JPRO DLA+ 2.0 Adapter

 

 

The Drag Torque Test is available on:
✓ Bendix EC-60 Premium or Advanced braking systems
✓ Bendix EC-80 ATC or ESP braking systems
This test raises and lowers torque limits and tests how the engine responds.

Procedures:

1. Select the Drag Torque Test and press Enter or the Start button.
2. The test dialog will be displayed.

3. Select the Start button to initiate the test. Test Status will display the commands as they are sent to the engine.
   A difference in engine speed and torque values can be observed as well as a change in engine sound. Click the
   Graph tab at any time to view a graph of the monitored data values.JPRO DLA+ 2.0
   4. Select the Stop button to stop the test at any point. The test will automatically stop after it has performed an
   increase and decrease cycle twice. The braking system will reset when the test ends which can be observed by
   audible clicking from the brake modulator valves.
   5. When done, press the Exit button to return to the test selection dialog.

 

More topics about JPRO Diagnostic,please refer to:JPRO Diagnostics Guide