In this instruction,car-auto-repair.com will show you guide on how to use AVDI diagnostics to do all keys lost programming for 2018 Nissan Kicks.
Software used:
NN006-PIN and Key Manager for Nissan/Infiniti
AMS-Annual Maintenance Subscription
Hardware used:
AVDI-Abrites Vehicle Diagnostic Interface
New Nissan key from Nissan
Procedures:
Connect AVDI to the OBD connector
Prepare a new Nissan key
Running Abrites Diagnostics software, select Model
Click “Continue”
Enter “Key Learning” menu
PIN Reading and key registration wizard, Press and Hold “start” to begin
Please turn ignition ON then OFF and make sure the hazard lights ON, Press NEXT button when ready
Once the PIN is found, select the number of keys you want to learn. Click “Next”
Make sure to follow the one-screen instructions
Turn IGNITION OFF and press OK when ready
Use the key to press the Start button as described to store it
Time to test now
If you want to know more about Nissan, please refer to Nissan Trouble Repair.
Here is the instruction show you guide on how to assemble Kubota L3301 L3901 L4701…
This instruction show you guide on how to solve Doosan Stage V excavator U013C trouble…
This instruction show you guide on how to solve spool brake solenoid open circuit for…
This instruction show you guide on how to remove and install crankshaft rear seal for…
This instruction show you guide on how to use JPRO diagnostic to do SCR performance…
Here is the instruction show you guide on how to remove and disassemble master cylinder…