The latest functionality of Abrites(AVDI) is the MZ001 license. The key programming special function for Mazda 3 and Mazda CX-30 vehicles produced after 2020 allows you to add keys in both spare key and all keys lost situations as well as deleting existing keys.
If all keys are lost, the procedure is performed completely by OBDII and works with original keys which can be reused once programmed. It requires you to be connected to the internet and have an active AMS. It takes 7-8 minutes in total. This instruction we will show you how to program two keyless-type keys for 2020 CX-30 that has no working keys.
More cases about key programming, please refer to All keys lost programming.
Procedures:
Starting the Mazda software, click “OK”
Open “Key Learning” under the special functions tab
Select the CX-30 Model
All lost keys must first be erased
Switch IGN ON at this step
and follow the on-screen software instruction
Select “Yes” to program a key
Follow the on-screen software instruction to program two keys
Function is completed.
More cases about MAZDA, please refer MAZDA REPAIR.
This instruction show you guide on how to solve Scania truck motion and inclination detector,…
This instruction show you guide on how to solve JCB excavator 140 C130C-13 spool brake solenoid…
Scania truck fault in the CAN communication with the chassis management system (CMS),this instruction show…
The water pumps used on all Phaser/1000 Series engines have been changed. The changes to…
Here is the simple instruction on how to solve Deutz engine EMR3 trouble code 48…
CAT ET 2025A Power Shift Pressure Test function checks whether that the proportional reducing valve is…