Categories: Auto Knowledge

5 common problems on the 3rd Generation Hyundai Tucson SUV

This article describe 5 problems with the 3rd generation of the Hyundai Tucson, which is available in model years 2015 to 2020. For more Hyundai cases, please refer to HYUNDAI TROUBLE REPAIR.

 

No.1 Speed Sensor

Speed Sensor is located in the transmission. If you have any symptoms that the check engine light on and the vehicle is shifting erratically, it’s probably not in your transmission, it’s just going to be that sensor. It’s going to be cheaper to replace and easier.

 

No.2 Airbag Control Module

It’s only on certain vehicles have a problem with the airbag control module and it controls the deployment of the airbags.The symptom for this is the the airbag may not deploy properly during and accident , if you have a concern about this you have to check with your local dealer.

 

No.3 Radio Software Glitch

There are some different symptoms of the radio not working , properly or even no sound coming out of the radio.

If you have this symptom is do a hard reset by disconnect the negative terminal on the battery 15 minutes, and then reconnect the battery. There doesn’t appear to be any software updates so this is the repair for this situation. After doing this, it probably won’t happen again but it might.

 

No.4 Acceleration Issue due to a software glitch

When you go to accelerate rapidly there’s going to be a delay. If you have this symptom please contact your local dealer.

 

No.5 EVAP Temp Sensor

The symptom is you’re going to find the air condition isn’t working properly what’s actually happening is the computer system isn’t getting the correct readings from the temperature sensor and causing the AC not to work properly. If you replace that sensor, everything should be back to normal.

Kevin

Recent Posts

How to Use CAT ET 2025A to Test Misfire Detection for Caterpillar Machine?

Here is the how to use guide on Caterpillar machine misfire detection test by CAT…

23 hours ago

How to Use Trucktool to Change Parameters for Forklift?

On the Trucktool diagnostic software Settings view, you can edit single parameters, import and export…

3 days ago

Scania Truck Road Transport Informatics Monitor RTI 260 Error Solution

Here is the instruction show you guide on how to solve Scania truck road transport…

2 weeks ago

Allison 3000 & 4000 Gen 5 Engine Speed Sensor Circuit No Signal Solution

Here is the instruction show you guide on how to solve engine speed sensor circuit…

2 weeks ago

How to Use CAT ET 2025 to Perform Override Parameters Test?

This instruction show you guide on how to use CAT ET 2025A to perform override…

2 weeks ago

How to Install the Reverser Drive for CLAAS LEXION 480?

This instruction show you guide on how to install the reverser drive for CLAAS Lexion…

4 weeks ago