This post will show you the procedures of how to use Volvo PTT to read out OBD/LVD parameters.Hope it helps!
What You Need?
2024 Volvo TechTool PTT 2.8.241 APCI 0.7.1.0/2.7.116 All Version Free Download
Volvo Diagnostic Kit (88890300)
Volvo VOCOM 88890300 Diagnostic Kit
Procedures:
Connect Volvo PTT interface to vehicle and run Volvo PTT
Click “OBD/LVD”–>”Full readout”
OBD-On Board Diagnostics
LVD-Logged Vehicle Data
This data is being stored to the PC.The data will be updated to the Central Systems server when internet connection is available per the scheduled task.This may be up to 2 hours.
Full readout completed
The OBD/LVD readout is completed
Here you also can perform a single modules LVD readout
Click “Select readout”
Here take “Engine Control Module (EMS)” as example,click “OK” to continue
Select on or more Control Units to read OBD/LVD from
Click “OK” to continue
After readout completed,click close
Important:Click on Finish Work if you need to work in another vehicle.
This instruction show you guide on how to solve Deutz EMR3 Engine speed overrun 80…
This instruction show you guide on how to solve Doosan Stage V machine U0632 timeout…
This instruction show you guide on how travel and adjust park brake piston for CASE…
Here is the instruction show you guide on how to replace purge valve for Fendit…
Here is the instruction show you guide on how to JCB machine SPN 102,FMI 1…
This instruction show you guide on how to install preconcave for CLAAS Lexion 480 combine…