Here is a easy guide on how to solve Scania trucks articulation control system ACS 37 trouble code repair.
Related Contents:
2024.07 Scania SDP3 V2.61.2 V2.40 Diagnostic Software Free Download
2023 2018 Scania Multi EPC Parts Catalogue Free Download
End position sensor 1 ACS
Error identification
The end position sensor is activated even though vehicle speed is so high that the articulation unit should be relatively straight.
Cause
Defective end position sensor.
Short circuit or open circuit in the end position sensor circuit.
The plate which activates the end position sensor is deformed or has been moved out of position.
Notes
ACS warning lamp comes on in the instrument cluster.
Action
Check the end position sensor.
Check cable harness and connectors.
Check whether the plate which activates the end position sensor is deformed or has been moved out of position.
For more information about Scania truck,please refer to:Scania Trouble Repair.
This instruction show you guide on how to inspect and clean cylinder block for John…
Here is the instruction show you guide on how to remove and replace cab heater…
Here is the instruction show you guide on how to remove differential gear for Fendt…
This instruction show you guide on how to solve International MaxxsForce 7 SPN 27 FMI…
BMW ISTA-D Rheingold 4.54.40/4.02.14 Standalone / SDP 4.02.13 / ISTA-P 3.60.0.600 free download link and…
This instruction show you guide on how to solve Detroit DD13 engine SPN 84 FMI…