The service setting code is now stamped on the side of the fuel injection pump (A1) together with the other pump data.
Modification of the fuel pump by Perkins will affect the setting code. Where this occurs, the original code is removed from the side of the pump and a plate (A2) with the latest code, is fitted to the pump flange. Where a plate is fitted to the pump flange, always use the setting code stamped on the plate.
Related Contents:
Perkins EST 2024A & 2023A & 2019A Software Free Download
Perkins SPI2 2018A EPC+Service Manual Free Download
An example of the service setting code would be 2643J602BK/1/2960, where:
2643J602 – Pump part number
BK – Code letters
1 – Spring information (standard for all Bosch pumps)
2960 – Maximum no load speed (rev/min)
More Perkins case,please refer to:Perkins Engine Trouble Repair
This instruction show you guide on how to remove second tank for CLAAS AXION 960-920…
This instruction show you guide on how to solve Doosan excavator P0408 maximum EGR rate…
Here is the instruction show you guide on how to calibrate 2403 steering valve for…
This function requires all connectors to be disconnected from all electrohydraulic valves on the tractor.You…
This instruction show you guide on how to remove center joint and center frame for…
How to solve Doosan heavy duty machine P0100 fault code signal error of air mass…