This instruction show you guide on how to solve spool brake solenoid open circuit for JCB JS140 excavator C130C-13 trouble code.
Related Contents:
2025 JCB ServiceMaster 4 v25.1.0 Free Download for Win 10 Win11
2017 JCB Parts Plus+ and Repair Service Manual Free Download
Possible Cause:
1 Faulty solenoid coil.
2 Wire harness not connected to spool lock solenoid.
Diagnosis:
1 Check the spool lock solenoid coil resistance by multimeter. Resistance values shall be 37Ω.
2 Check the wire harness connection between spool lock solenoid & machine wire harness. Refer enclosed photograph for solenoid location.
Corrective Action:
3 Replace faulty solenoid coil.
4 Replace the faulty wire harness.
More topics for JCB machine,please refer to:JCB Machine Trouble Repair.
This instruction show you guide on how to remove and install crankshaft rear seal for…
This instruction show you guide on how to use JPRO diagnostic to do SCR performance…
Here is the instruction show you guide on how to remove and disassemble master cylinder…
This instruction show you guide on how to solve Deutz EMR engine 71 / 2791 /…
Here is the instruction show you guide on how to repair P0731 incorrect 2nd gear ration…
Here is the how to use guide on Caterpillar machine misfire detection test by CAT…