Here car-auto-repair.com show you guide on how to install the KVASER(CAN Cable) driver for MPDr diagnostics.To install the driver, you need to have the installation authority (administrator authority).
Preparations:
Hitachi MPDr v2.56 v2.25 Diagnostic Software Free Download
Procedures:
1.Insert the attached CD into the PC.
2.Click [Kvaser Drivers].
3.Select the OS in your PC.
4.Click [Next].
5.Click [Next].
6.Click [Next].
7.Click [Install].
8.A installing screen is displayed during the installation.
Please wait for a while.
9.Click [Install].
10.Click [Close].
11.Connect the KVASER cable to the USB port on your PC.
12.Click [Start] – [Control Panel] – [Device Manager] and check that [Kvaser Leaf Light v2] is displayed.
The installation is completed.
This instruction show you guide on how to remove second tank for CLAAS AXION 960-920…
This instruction show you guide on how to solve Doosan excavator P0408 maximum EGR rate…
Here is the instruction show you guide on how to calibrate 2403 steering valve for…
This function requires all connectors to be disconnected from all electrohydraulic valves on the tractor.You…
This instruction show you guide on how to remove center joint and center frame for…
How to solve Doosan heavy duty machine P0100 fault code signal error of air mass…