Categories: Auto Repair

How to Use Launch X431 Unlock Radio Sound for Renault Koleos

Renault Koleos,The radio sound unlocking,Prompt:”Codevalidation in progress…”.Here show you guide on how to use Launch X431 to unlock radio sound for Renault Koleos.For more about Renault projects,please follow here:Renault Trouble Repair.

 

What You Need?

Launch X431 Pro

 

Note:

Before testing, please follow instructions as follow:

– If vehicle equipped with manual transmission .Please step down and release the clutch pedal

– The vehicle static.

– Have to apply Parking brake.

– For manual transmission, shift lever to empty space.

– For automatic transmission, change the lever to P position.

 

Operation Guide:

1.Select KOLEOS V42.31 above;

2.Manual Selection

3.Select the car model KOLEOS

4.Select radio system,

5.Select reading fault code

6.Dispaly error code as follow

7.The failure code shown in figure 7 indicates that the radio is locked,Simply enter the multimedia interface system for special functions “vehicle identifiers”.

Manual Selection

8.Select Car Model KOLEOS

9.Select multimedia interface system

10.Select multimedia interface system

11.Select special function

12.Select the vehicle identifier

13.Prompt which car model is suitable

14.Click”Confirm”,finish the prompt: After the configuration is completed (radio + interconnect/monitor), turn off the ignition switch and check the radio on + Whether the power supply location works normally

15After confirming, switch off the key,Exit to software. Switch on the ignition key. Check the function of the radio.

More test report about Launch X431 please check:Launch X431 Test report

auto

Recent Posts

JCB JS140 Excavator C130C-13 Spool Brake Solenoid Open Circuit Solution

This instruction show you guide on how to solve spool brake solenoid open circuit for…

2 days ago

Perkins 400A 400D Industrial Engine Crankshaft Rear Seal Remove and Install

This instruction show you guide on how to remove and install crankshaft rear seal for…

4 days ago

JPRO Diagnostic Software SCR Performance and System Test on Cummings

This instruction show you guide on how to use JPRO diagnostic to do SCR performance…

1 week ago

Yale ERP15-20VT G807 Forklift Truck Master Cylinder Removal and Disassemble Guide

Here is the instruction show you guide on how to remove and disassemble master cylinder…

2 weeks ago

How to Solve Deutz EMR3 71 / 2791 / EGRCD_SigNpl Error?

This instruction show you guide on how to solve Deutz EMR engine 71 / 2791 /…

2 weeks ago

How to Solve Allison 3000 & 4000 Gen5 P0731 Incorrect 2nd Gear Ratio?

Here is the instruction show you guide on how to repair P0731 incorrect 2nd gear ration…

2 weeks ago