Categories: Auto Knowledge

How to tell hydraulic and electric power steering system

All of vehicle owner know that vehicle steering wheel equip with power steering system.If your car does not equip with it,you will hardly to turn your steering wheel.In this article i will share how to tell hydraulc and electric power steering system.

 

Different kind of power steering system can be roughly determined by feel when you turn steering wheel.

  • If you turn the steering wheel easily and slightly,even just one finger can turn the steering wheel when you driving car at low speed.It can be judged that the car equiped with electric power steering system.

  • If you turn the steering wheel heavily when car running at low speed.The car is equiped with hydraulic power steering system.

In addition,there is a hydraulic oil tank installed in the engine compartment which be marked with a steering wheel logo.Electric steering wheel is not equiped with hydraulic oil tank.According to these symptoms,you can tell which kind of power steering system equiped on your car.

auto

Recent Posts

Valtra BH Series 140-210 Trouble Internal Roll inertial Sensor Fault

This instruction show you guide on how to solve Valtra BH Series 140-210 trouble code SA…

2 days ago

Caterpillar C9 Engine Throttle Position Out of Calibration 28 91-13 Trouble Solution

This instruction show you guide on how how to solve trouble code 28 PID 91-13…

5 days ago

Magneti Marelli 1 AVB-VW ECU Pinout

Vehicles: With AP 1.6, 1.8 and 2.0 Ml engines DE 97 to 99. And for…

1 week ago

Valtra BH Series 140-210 Internal lateral Inertial Sensor Recalibration

This instruction show you guide on how to solve Valtra BH Series 140-210 trouble code SA…

1 week ago

Bendix AutoVue 3G LDW System Driver Assistance Systems (DAS) Tests

JPRO 2025V3 Driver Assistance Systems (DAS) Tests allows the editing of configuration parameters.   Related Contents:…

2 weeks ago

How to Solve PCC2300 PowerCommand Membrane Buttons Not Functioning

This instruction show you guide on how to solve PCC2300 Powercommand Membrane buttons not working.…

2 weeks ago