Categories: Auto Repair

How To Solve VW Magotan Trunk Can Not Opened by Handle

One of my customers drove this VW Magotan with 200km to our garage,and told that the trunk can not opened by handle.This article share the progress of how to solve VW Matotan 2011 trunk can not be opened by handle.

Trunk trouble diagnose:

1. The trunk can be opened by remote fob and master power window switch.

2. Use the vas5052a access the comfort system and there was no trouble code.

3. VAS 5052A show “no operation” when press the unlock button on the trunk handle.

 

Below shows the part electric diagram of VW Magotan,according to the diagram we know that the unlock button E234 is a switch button,and comfort system control unit J393 will receive signal when press the unlock button.After receiving the signal,the comfort control unit J393 power on motor V53 of trunk,then open the trunk.

E234-Trunk unlock button       F5-Trunk light switch   J393-Comfort system control unit

There are three methods to open the trunk:remote fob,master power window swith and trunk handle.And we have verified that the trunk can be open by remote fob and master power window swith.So it mean the motor and comfort system work correctly,and we found vas 5052a show “no operation” when press the unlock button on the trunk handle.Considering above testing,we can determained that there are trouble in swith E234 or relevant wire harmness.

Remove the trunk handle switch button,and we found the wire connector pins loose result in signal can not communnicate from unlock button to comfort system control unit,so trunk can not be open.

 

Solution:

Fix the wire connector,and the test the trunk,it can be opened by handle.

auto

Recent Posts

How to Solve AGCO Machine SPN100 FMI 01 Oil Pressure Low Alarm

This instruction show you guide on how to solve AGCO machine SPN100 FMI 10 oil…

2 days ago

Valtra BH Series 140-210 Internal Inertial Sensor Temperature Error

Here is the instruction show you guide on how to solve Valtra BH Series 140-210…

5 days ago

Caterpillar Excavator Transmission Torque Protection Reset by CAT ET 2025A

This instruction show you guide on how to use CAT ET 2025A to perform transmission…

1 week ago

How to Solve JCB Machine SPN 103, FMI 0 Turbocharger Speed too High

Here is the instruction show you guide on how to solve JCB machine SPN 103,FMI…

2 weeks ago

How to Solve Deutz EMR3 80 / 190 Engine Speed Overrun

This instruction show you guide on how to solve Deutz EMR3 Engine speed overrun 80…

2 weeks ago

Doosan Stage V Machine U0632 CAN-Receive-Frame Timeout Error Solution

This instruction show you guide on how to solve Doosan Stage V machine U0632 timeout…

3 weeks ago