Categories: Auto Coding

How to Set Rear Fog Light as A Brake and Parking Light by VCDS for 2004 Audi A3

This short instruction will show you guide on how to change turn signal light as parking light (US Style Indicators Enabling) by VCDS for 2004 Audi A3.

This function also suitable for Volkswagen,Seat,Skoda.

 

Procedure:

Connect VCDS to vehicle OBD port, running VCDS.

Click “Select” for select control module

Select “09-Cent. Elect.

Select “Coding”

Select “Long Coding Helper”

Input “22”

Select “Bit 4”

Click “Do It!”

Coding accepted.

 

For more cases about Audi A3, welcome to visit here: AUDI A3 REPAIR.

Kevin

Recent Posts

How to Solve Deutz EMR3 71 / 2791 / EGRCD_SigNpl Error?

This instruction show you guide on how to solve Deutz EMR engine 71 / 2791 /…

10 hours ago

How to Solve Allison 3000 & 4000 Gen5 P0731 Incorrect 2nd Gear Ratio?

Here is the instruction show you guide on how to repair P0731 incorrect 2nd gear ration…

3 days ago

How to Use CAT ET 2025A to Test Misfire Detection for Caterpillar Machine?

Here is the how to use guide on Caterpillar machine misfire detection test by CAT…

5 days ago

How to Use Trucktool to Change Parameters for Forklift?

On the Trucktool diagnostic software Settings view, you can edit single parameters, import and export…

1 week ago

Scania Truck Road Transport Informatics Monitor RTI 260 Error Solution

Here is the instruction show you guide on how to solve Scania truck road transport…

2 weeks ago

Allison 3000 & 4000 Gen 5 Engine Speed Sensor Circuit No Signal Solution

Here is the instruction show you guide on how to solve engine speed sensor circuit…

3 weeks ago